Home

6 Common Types of Home Alarm System

Various forms of the home alarm system are available in the market. They range from an ordinary DIY alarm to fully equip along with programming smart alarms that can be operational from your smartphone or tablet. 

It’s difficult to choose the best one for your home, so here are different types of the home alarm system to help you in selection:

1. DIY Alarm System

This type of alarm system is comparatively inexpensive than the custom alarm system, but you will get what you pay for. There are two major flaws in the DIY alarm system which hinders the comprehensive security of your home;

  • The devices used in this type of alarm system are not approved by the industry so the authorities and insurance companies consider it unreliable. Therefore, no help from authorities will be there for you in case of an emergency.
  • Such types of alarms are usually installed by an unskilled person which leads to many faults like tripping, mismatching of sensors, and deceitful alarms.

2. Conventional Wired Alarm System

A typical wired alarm system consists of small wires that connect the control panel and the sensors. This type of system depends upon the type of fitting, if the wires are hidden then this system can work properly.

3. Wireless Alarm System

For the wireless system, u need only to install and software programming of the controller. No wires are hanging with the sensors that are easily fixed in any place. The price of this type of alarm system is a bit higher than the traditional alarm systems, though they are becoming affordable due to the progress in technology. Batteries are required for the operation of the sensors but they are using low power so no need to change frequently. 

Sensor Types

The sensors included in the home alarm system are as follows:

  • Active infra-red (beam) motion sensor
  • Passive infra-red (PIR) heat sensor,
  • A sensor that is activated by the magnetic contact breakdown.

Magnetic contact sensors 

These sensors are fixed on either doors or windows, which activated when the contact breaks, which means when the door or the window gets opened forcefully.

Beam motion sensors 

When the beam of IR light emission is hindered, these sensors activate, as they are directional sensors so they are more suitable outdoors.

PIR sensors 

There are used in the detection of the changes in IR in a room, through the heat that is emitted by living targets showing movements.

4. Pet-Friendly Alarms

The motion or the IR sensors commonly set out by the movement of the pets. In such cases, it is necessary to install a pet-friendly alarm system. The extremely subtle PIR sensors are used in such types of alarms. The heat signature of your pet is measured at the time of installation so that the alarm will only trigger if an unusual heat signature is sensed.

5. Zone-specific Alarm Systems

These alarms are area specifics means you can have complete control over which area of your home is secured by alarm, and which are not so that you can rove around without any hindrance.

For instance, if you would like to work downstairs while kids are studying upstairs, then you can activate the alarm of the upper portion. Zone-specific alarms are useful mostly in the nighttime as you can switch on the alarm for entrance doors, but deactivate it for the rest of the home. If you want to be a security guard, you should need Security Guard Course.

6. Smart home alarms

When you have the wireless alarm so you can have complete control of your home through the smart home alarm. The Houston home alarm provides you with an additional benefit. The CCTV installation along with smart alarm so that you can have the live camera feeds on your smartphone anytime anywhere.

Related Articles

Leave a Reply

Back to top button