Technology

Different types of check valves

A check valve is a device that allows fluid to flow in one direction and prevents it from flowing in the opposite direction. There are many different types of check valves available, each with its own advantages and disadvantages. In this article, we will discuss the three most common types of check valves: ball valves, flap valves, and tilting disc valves. Stay tuned!

Check valves are used in a variety of applications, such as water pumps, air compressors, and fuel injectors. They are also used in many industrial applications, such as oil and gas pipelines, where they are critical for preventing backflow that could damage equipment or cause injuries.

Types of check valves

There are three main types of check valves: swing check valves, ball check valves, and butterfly check valves. Each type has a different function and is used in different situations.

Swing check valves are considered the most common type of valve. They have a hinged flap that opens when fluid flows through the valve in the right direction, and closes when fluid flow is reversed. Swing check valves are used to prevent backflow in pipelines and are often used in gravity-fed systems. Are you in the market for a brass swing check valve? If so, you’ll be happy to know that there is a reputable brass swing check valve manufacturer out there who can provide you with the best products in the industry. 

Ball check valves have a sphere that sits inside the valve body. When fluid flows through the valve in the right direction, the sphere is pushed to the side and fluid can flow through. When fluid flow is reversed, the sphere blocks the hole and prevents backflow. Ball check valves are often used in high-pressure systems.

Butterfly check valves have a disk that sits in the center of the valve body. The disk has a hole through the center of it. When fluid flows through the valve in the right direction, the disk is pushed to the side and fluid can flow through. When fluid flow is reversed, the disk blocks the hole and prevents backflow. These valves are often used in systems where a high degree of accuracy is needed, such as in measuring instruments.

How to install a check valve

To start, you’ll need to shut off the water to the area where you’ll be installing the check valve. Once the water is shut off, locate the main water line and find a spot where you can cut into it. It’s important to make sure that you have a clean, straight cut so that the check valve will fit properly.

Next, take your check valve and attach it to the water line. Make sure that it’s tight and there are no leaks. Once the check valve is in place, turn the water back on and test it out. If everything is working properly, you should now have a check valve installed!

Bottom Line

There are many types of check valves and all these valves have many benefits in your piping system. These valves help to prevent backflow, which can cause damage to your pump or other equipment. 

Related Articles

Leave a Reply

Check Also
Close
Back to top button